Machinery
Used Machinery
Used woodworking machinery. We assess the technical condition of each machine and check whether it suits your application.
Loading used machinery…
Could not load used machinery. Please try again later.
No machines match the current filters. Reset the filters or tell us what you are looking for.
Planers
Bäuerle thicknesser
BÄUERLE
Used thicknesser with 630 mm planing width, workpieces up to 220 mm thick, 8 mm maximum depth of cut, a 4-knife cutterblock and a 5.5 kW motor.
Edge banding machines
Brandt automatic edge banding machine
BRANDT
Used automatic edge banding machine for panels up to 50 mm thick and 0.4–3 mm edging, with pre-milling, end trimming, fine trimming, scraping and buffing.
Combined woodworking machines
Felder saw-spindle moulder
FELDER
Used saw-spindle moulder with a 2050 mm sliding table, Ø 315 mm saw blade, tilting spindle and separate 5.5 kW motors for the saw and the spindle moulder.
Sliding table saws
Format-4 sliding table saw
FORMAT-4
This used Format-4 sliding table saw has a scoring unit, three spindle speeds and motorised adjustment of the main blade height and tilt.
Edge banding machines
Homag automatic edge banding machine
HOMAG
This used Homag automatic edge banding machine processes panels up to 60 mm thick with 0.4–3 mm edging and has pre-milling, corner rounding and a feed speed of 8–14 m/min.
Planers
Jaroma double-sided planer
JAROMA
Used double-sided planer with a maximum planing width of 400 mm and a 6 / 12 m/min feed, for workpieces up to 170 mm thick.
Presses
Joos veneer press
JOOS
Used hydraulic veneer press with a 2500 x 1100 mm working area, electrically heated platens, 4 pressing cylinders and a clear opening of 380 mm between the platens.
Sawing machines
OGAM multi-rip saw
OGAM
Used multi-rip saw with crawler chain feed, 350 mm saw blades on a single arbor, workpieces up to 110 mm thick, 300 mm feed chain width and an 18 kW motor.
Sliding table saws
Paoloni sliding table saw
PAOLONI
Used sliding table saw with a cutting length of 3200 mm, a cutting width of 1350 mm at the rip fence, a maximum cutting height of 120 mm and a scoring unit with its own 0.55 kW motor.
Drilling and boring machines
Rapid knot hole drilling machine
RAPID
This used Rapid knot hole drilling machine has 4 drilling spindles, a two-speed motor and a drilling unit with 100 mm height adjustment.
Combined woodworking machines
REX tenoning and cross-cut machine
REX
Used tenoning and cross-cut machine for timber beams, with a Ø 800 mm main saw blade, 315 mm maximum cutting height, saw head swivel ±60° and tenoning units above and below.
Sliding table saws
Robland sliding table saw
ROBLAND
This used Robland sliding table saw has a cutting length of 3200 mm, a cutting width of 1350 mm and a scoring unit with its own 0.75 kW motor.
Planers
TOS Svitavy double-sided planer
TOS SVITAVY
Used double-sided planer for planing the top and bottom faces in one pass, with 810 mm planing width, workpieces up to 200 mm thick and cutterblock motors of 10 kW and 7.5 kW.
Four side moulders
Weinig four side moulder
WEINIG
Used four side moulder with 6 spindles, 230 mm working width, 170 mm working height, 6–24 m/min feed speed and 50 kW total installed power.
Have a machine to sell?
Submit the machine details, current condition, location and available documentation. PROMACH will review the information and determine whether a direct purchase proposal or a brokerage arrangement may be suitable.