New Machinery

Sliding table saws

Fimal P 350 NX sliding table saw

FIMAL

Sliding table saw with a 3200 mm sliding table, scoring unit, 1300 mm cutting width at the rip fence and a main blade up to 350 mm in diameter, with motorised raising and tilting and a digital tilt angle display.

Sliding table saws

Fimal P 3200 NX sliding table saw

FIMAL

Sliding table saw with a 3200 mm sliding table, scoring unit, 1300 mm cutting width at the rip fence and a main blade up to 500 mm in diameter, with motorised raising and tilting, an electronic tilt display and a manual rip fence.

Sliding table saws

Fimal P45 sliding table saw

FIMAL

The Fimal P45 sliding table saw has a 3200 mm sliding table, a scoring unit, a cutting width of 1300 mm at the rip fence, a main blade up to 450 mm in diameter and motorised height adjustment for the main blade.

Sliding table saws

Fimal P 3200 SX sliding table saw

FIMAL

Sliding table saw with a 3200 mm sliding table, scoring unit, main blade up to 500 mm in diameter and a motorised rip fence for a cutting width of 1300 mm.

Sliding table saws

Fimal P 3200 AX sliding table saw

FIMAL

Sliding table saw with a 3200 mm sliding table, scoring unit, main blade up to 500 mm in diameter, 1300 mm cutting width at the rip fence and a 3-axis programmer for blade raising, tilting and rip fence positioning.

Sliding table saws

Fimal P 350 SX sliding table saw

FIMAL

Sliding table saw with a 3200 mm sliding table, scoring unit, main blade up to 350 mm in diameter, 1300 mm cutting width at the rip fence, programmed blade raising and tilting and a rip fence position display.

Sliding table saws

Fimal P 350 AX sliding table saw

FIMAL

Sliding table saw with a 3200 mm sliding table, scoring unit, main blade up to 350 mm in diameter, 1300 mm cutting width at the rip fence and a 3-axis programmer for blade raising, tilting and the motorised rip fence.

Beam saws

Fimal Concept Elite 350 / 450 beam saw

FIMAL

Beam saw with a pressure beam and Multi-Stop positioning, with a tilting blade on the Concept Elite 350 and a non-tilting blade with up to 150 mm blade projection at 90° on the Concept Elite 450.

Beam saws

Fimal Concept 350 Plus beam saw

FIMAL

Beam saw with a full-length pressure beam, a Ø 300–350 mm main blade tilting up to 46°, a programmable rear stop and panel detection, in versions with a cutting length of 2600, 3200 or 3800 mm.

Beam saws

Fimal KR 32 / KR 43 electronic beam saw

FIMAL

Electronic beam saw with a programmable pusher and a separate scoring unit, with a maximum cutting length of 3200 mm on the KR 32 and 4300 mm on the KR 43 and a maximum cutting height of 72 mm on both models.

Planers

Fimal DR 53 combined surfacer-thicknesser

FIMAL

Combined surfacer-thicknesser with a 530 mm planing width, a maximum workpiece thickness of 250 mm and surfacing tables that lift together under power.

Planers

Fimal PF 415 N surface planer

FIMAL

Surface planer for solid wood with a 415 mm planing width, cast iron tables with a combined length of 2700 mm, manual infeed table adjustment and a 3 kW motor.

Planers

Fimal S 53 N thicknesser

FIMAL

Thicknesser for solid wood with a 530 mm planing width, a workpiece thickness range of 3–310 mm, push-button table height adjustment and a 4 kW motor.

Planers

Fimal PF 530 N surface planer

FIMAL

Surface planer for solid wood with a 530 mm planing width, cast iron tables with a combined length of 3000 mm, manual infeed table adjustment and a 4 kW motor.

Planers

Fimal PF 530 A surface planer

FIMAL

Surface planer for solid wood with a 530 mm planing width, cast iron tables with a combined length of 3000 mm, motorised infeed table adjustment with electronic readout and a 4 kW motor.

Planers

Fimal PF 535 A surface planer

FIMAL

Surface planer for solid wood with a 530 mm planing width, cast iron tables with a combined length of 3500 mm, motorised infeed table adjustment with electronic readout and a 4 kW motor.

Planers

Fimal S 63 N thicknesser

FIMAL

Thicknesser for solid wood with a 630 mm planing width, a workpiece thickness range of 3–310 mm, motorised push-button table height adjustment with digital readout and a 5.5 kW motor.

Planers

Fimal S 63 A thicknesser

FIMAL

Thicknesser for solid wood with a 630 mm planing width, a workpiece thickness range of 3–310 mm, electronic table positioning, 6–20 m/min feed via frequency inverter and a 5.5 kW motor.

Spindle moulders

Fimal T 270 / C / L / CL spindle moulder

FIMAL

Spindle moulder available in four versions, with a fixed or optional tilting spindle, 270 mm usable spindle length, five speeds up to 10000 rpm and a 5.5 kW motor.

Spindle moulders

Fimal T 160 / C / L / CL / CF spindle moulder

FIMAL

Spindle moulder with a non-tilting spindle and a 5.5 kW motor, available with a side-mounted tenoning carriage on the C and CL versions and a front-mounted carriage on the CF.

Spindle moulders

Fimal TX 160 / C / L / CL / CF spindle moulder

FIMAL

Spindle moulder with a tilting spindle and a 5.5 kW motor, available with a side-mounted tenoning carriage on the C and CL versions and a front-mounted carriage on the CF.

Edge banding machines

Casadei Industria Kronos 60.0 automatic edge banding machine

CASADEI INDUSTRIA

Automatic edge banding machine with pre-milling, a glue pot for EVA and PUR, a feed speed of 12 m/min and a TRIA unit for end trimming, flush trimming and corner rounding.

Edge banding machines

Casadei Industria E550 CRF automatic edge banding machine

CASADEI INDUSTRIA

The Casadei E550 CRF applies edging to panels 8–50 mm thick at a feed speed of 9 m/min, with pre-milling, end trimming, flush trimming and corner rounding for plastic edging.

Edge banding machines

Casadei Industria E450 compact automatic edge banding machine

CASADEI INDUSTRIA

The Casadei E450 applies edging to panels 8–45 mm thick at a feed speed of 7 m/min, with pre-milling, automatic end trimming and flush trimming.

Edge banding machines

Casadei Industria E321 compact automatic edge banding machine

CASADEI INDUSTRIA

The Casadei E321 applies 0.4–2 mm edging to panels 10–45 mm thick using a toothed feed belt running at 7 m/min, with end trimming and top and bottom flush trimming.

CNC nesting machines

HELEX HE 2100 C CNC nesting machining centre

HELEX

Nesting centre for furniture panels, with a 2100 x 2800 mm working area, a 9 kW spindle and automatic tool change from a 12-position linear magazine.

Edge banding machines

HELEX HE 60 EL automatic edge banding machine

HELEX

Edge bander with 15 functions for straight and L-type edges on panels 10 to 60 mm thick, with pre-milling, servo tape feed, adaptive trimming and scraping.

Edge banding machines

HELEX HE 65 M automatic edge banding machine

HELEX

Edge bander for panel thickness 10–60 mm and edge thickness 0.4–3 mm, with pre-milling, rough and fine trimming, corner rounding, scraping and buffing, up to 23 m/min.

Beam saws

HELEX HE 3200 S beam saw

HELEX

Beam saw with a programmable pusher and pressure beam, with a 3200 mm cutting length and a 3100 mm cutting width, for panel stacks up to 90 mm in total height.

Drilling and boring machines

HELEX HE 2800 D six-sided CNC drilling machine

HELEX

Six-sided CNC drilling machine for panels up to 2800 x 1200 x 50 mm, with barcode identification and grooving on both main faces in one cycle.

Drilling and boring machines

HELEX HE 1200 D6 six-sided CNC drilling machine

HELEX

Six-sided CNC drilling machine for panels up to 1220 mm wide, with barcode identification, automatic positioning and an upper spindle for grooving and routing.

Sawing machines

HELEX HE 500 R straight-line rip saw

HELEX

Single-blade straight-line rip saw for solid wood, with powered feed, a 9 kW main motor, a feed speed of 3–26 m/min and a 1750 x 860 mm worktable.

Presses

HELEX HE 3200 L / HE 4200 L / HE 5200 L / HE 6200 L hydraulic gluing press for solid wood

HELEX

The HELEX HE L series comprises four hydraulic gluing presses for solid wood, with working lengths of 3200–6200 mm and 6–12 vertical pressing cylinders, depending on the model.

Painting and surface finishing machines

HELEX HE 1400 B semi-automatic PUR flat lamination line

HELEX

The HELEX HE 1400 B laminates one face of panels 3–60 mm thick using a five-roller PUR adhesive coater at a feed speed of 5–10 m/min.

Painting and surface finishing machines

HELEX HE 1200 B cold-glue flat lamination line

HELEX

The HELEX HE 1200 B laminates decorative paper and PVC foil onto panels 3–40 mm thick with cold glue, using roller glue application and roller pressing at a feed speed of 5–17 m/min.

Dust extraction

HELEX HE 600 F filter unit with metal containers

HELEX

The HELEX HE 600 F is a filter unit with an airflow of 60000 m³/h for central extraction of sawdust and wood dust from several machines, with collection in rail-mounted metal containers.

Dust extraction

HELEX HE 200 F filter unit with metal containers

HELEX

The HELEX HE 200 F filter unit has an airflow of 20000 m³/h and collects sawdust and wood dust from several machines in rail-mounted metal containers.

Dust extraction

HELEX HE 600 FB filter unit with big bags

HELEX

The HELEX HE 600 FB is a filter unit with an airflow of 60000 m³/h that collects sawdust and wood dust from several machines in big bags placed on pallets.

Dust extraction

HELEX HE 120 FB filter unit with big bag

HELEX

The HELEX HE 120 FB is a filter unit with an airflow of 12000 m³/h that collects sawdust and wood dust from several machines in a big bag on a pallet.

Dust extraction

HELEX HE 500 FS filter unit with collection bags

HELEX

The HELEX HE 500 FS is a filter unit with an airflow of 50000 m³/h that collects sawdust and wood dust from several machines directly in transparent bags.

Dust extraction

HELEX HE 160 FS filter unit with collection bags

HELEX

The HELEX HE 160 FS is a filter unit with an airflow of 16000 m³/h that collects sawdust and wood dust from several machines directly in transparent bags.

Dust extraction

HELEX HE 100 AMS mobile dust extractor with collection bags and coarse material separator

HELEX

The HELEX HE 100 AMS is a mobile dust extractor with an integrated fan and an airflow of 10000 m³/h that collects sawdust and wood dust at the machine in four transparent bags.

Dust extraction

HELEX HE 100 AMC mobile dust extractor with metal containers and coarse material separator

HELEX

The HELEX HE 100 AMC mobile dust extractor has an integrated fan with an airflow of 10000 m³/h and collects sawdust and wood dust in three wheeled metal containers.

Sawing machines

Lamella processing line LL 1500

The LL 1500 profiles both longitudinal edges of solid wood lamellas 200–1500 mm long and transfers them automatically for trimming and profiling at both ends.

Combined woodworking machines

Universal combination machine CU 400

The CU 400 is a five-function universal combination machine for woodworking, with a maximum planing width of 400 mm and an 1800 mm sliding table.

Combined woodworking machines

Universal combination machine CU 300

The CU 300 is a five-function universal combination machine with a maximum planing width of 300 mm, a 1000 mm sliding table and three independent 3 kW motors.

Portable carpentry machines

Chain mortiser CM 100 / CM 150 / CM 200

CM series chain mortisers cut mortises in timber components to a maximum depth of 100, 150 or 200 mm, depending on the model.

Portable carpentry machines

Chain slotter FS 175

The FS 175 cuts longitudinal slots 7 or 11 mm wide in timber beams and other large-section elements to a maximum depth of 175 mm.

Portable carpentry machines

Carpentry planer RD 300

The RD 300 planes beams and solid timber elements at widths up to 300 mm, with the planing depth adjustable from 0 to 4 mm.

Portable carpentry machines

Portable band saw FP 300

The FP 300 is a hand-guided portable band saw for cutting timber beams and other solid timber elements to a maximum depth of 300 mm.

Sanding machines

Brush sanding machine SP 1000

Brush sanding machine for raw wood and primer sanding on rustic and CNC-carved surfaces, with 2 or 3 sanding units, for workpieces 50–1000 mm wide and 6–80 mm thick.

Sanding machines

Orbital and brush sanding machine SO 1300

The SO 1300 uses four sanding units on flat and profiled surfaces and detects each workpiece at the infeed using image processing.

Painting and surface finishing machines

Automatic reciprocating spray machine VP 1300

The VP 1300 uses two reciprocating arms to spray paint and varnish onto flat workpieces 50–1300 mm wide and 3–100 mm thick at feed speeds of up to 8 m/min.